Why Every High-Volume Reloader Needs the DAA Auto Case Lubricator

If you spend any significant time behind a reloading press, you already know the drill: case lubrication is a critical necessity to prevent stuck brass, reduce press lever drag, and ensure smooth cycling. However, traditional manual lubrication methods are messy, inconsistent, and time-consuming.

Enter the DAA Auto Case Lubricator (ACL) by Double-Alpha Academy. Designed specifically for high-volume shooters and reloading enthusiasts, this innovative accessory automates one of the most frustrating parts of the reloading process.

Here is a breakdown of why the DAA Auto Case Lubricator is a game-changer for your reloading bench and why it deserves a permanent spot on your progressive press.

The Problem with Traditional Case Lube Methods

Before looking at how the DAA Lubricator works, it helps to review why traditional case lube techniques fall short:

• Messy Box-Spraying: Pre-spraying cases in a flat cardboard box or ziplock bag often results in uneven coverage. Some cases end up soaked, while others barely get a mist.

• Contaminated Feeder Bowls: Throwing pre-lubed cases directly into your case feeder transfers sticky residue into the bowl and feed plate, creating a dirt magnet that requires frequent cleaning.

• In-Case Contamination: Over-spraying frequently gets liquid lube inside the case necks. Excess lube inside the case can contaminate powder charges or cause misfires.

• Inconsistent Press Feel: Irregular lube distribution leads to varying sizing resistance, throwing off your rhythm and increasing operator fatigue during long reloading sessions.

Key Benefits of the DAA Auto Case Lubricator

The DAA Auto Case Lubricator mounts directly onto your 18mm vertical case feeder tube (standard on Dillon 650, 750, 1050, 1100, and 1250 presses), applying lubricant automatically as each case drops down toward the shell plate.

                     [ Case Feeder Bowl ]
                              │
                      [ Feed Tube Top ]
                              │
            ┌──────────────────────────────────┐
            │  DAA Auto Case Lubricator (ACL)  │
            │  - Reservoir (fill level control)│
            │  - 4 Wicks (even outer contact)  │
            └──────────────────────────────────┘
                              │
                     [ Feed Tube Bottom ]
                              │
                    [ Press Shell Plate ]

1. Zero Pre-Spraying or Pre-Batching Required

With the DAA ACL, you can pour dry, clean brass straight from your dry tumbler into your case feeder. The unit lubricates cases dynamically on their way to the shell plate, eliminating pre-batch prep steps entirely.

2. Keeps Your Case Feeder Clean

Because lubrication occurs after brass leaves the feeder bowl, your hopper, feeder plate, and upper feed tube remain clean and oil-free.

3. Precision External Application (No Powder Contamination)

The DAA ACL uses a four-wick wick delivery system. These wicks lightly touch only the outer wall of passing brass. This targeted application keeps the internal case neck dry, preserving powder integrity and reliable ignition.

4. Fully Adjustable Lubrication Levels

Different calibers and brass conditions require different amounts of lube. The DAA ACL gives you full control through two adjustments:

• Wick Protrusion: Gently extend or pull back the wicks to dial in exact contact pressure.

• Reservoir Fill Level: Adjusting the liquid height in the reservoir fine-tunes how quickly fluid saturates the wicks via capillary action.

5. Multi-Caliber & Cross-Press Compatibility

Designed for versatility, the DAA Auto Case Lubricator works seamlessly across popular handgun calibers from 9mm to .45 ACP, as well as rifle cases. It mounts easily on standard 18mm vertical feed tubes.

DAA Auto Case Lubricator Specifications Overview

*Note: Requires tube trimming for proper fitment depending on the specific press model.

Easy Maintenance and Smart Drain Design

Double-Alpha Academy engineered the ACL with practical session cleanup in mind. When you finish reloading for the day, lower the attached drain tube to quickly return unspent lubricant back into its bottle. Because high-performance case lubes rely on fast-evaporating alcohol bases, draining the unit between sessions prevents premature evaporation and keeps your wicks fresh.

Is the DAA Auto Case Lubricator Worth It?

If you reload hundreds or thousands of rounds a month for competition, training, or high-volume practice, yes. The DAA Auto Case Lubricator pays for itself in time saved, cleaner equipment, and consistent sizing effort on every single pull of the press handle.

Pro Tip: Pair the DAA Auto Case Lubricator with high-alcohol fast-drying case lubes (like DAA Case Lube) for the slickest feed and fastest dry times on the shell plate.

Upgrade Your Reloading Setup Today

Stop wasting time pre-spraying cases and cleaning gunked-up feeder bowls. Experience automated, mess-free case lubrication by upgrading to the DAA Auto Case Lubricator.